Automatic Blood Pressure Monitor
This fully automatic digital upper arm blood pressure monitor offers the user comfortable, accurate and precise blood pressure readings using the advanced measuring technique. Convenient to track your health every day.
It is with Large Multi-Color Backlit display and extralarge BP Cuff.(22-44cm)
This item comes presentably boxed up in retail color packaging and includes a CONVENIENT TRAVEL POUCH.
Why Choose Ybor Blood Pressure Monitors
Our digital blood pressure monitor makes it easy to read blood pressure. Simply strap the cuff around your upper arm and press the start button to begin the process. The fully automatic unit will display the measurements of diastolic and systolic pressure, pulse rate. It will alert you instantly if abnormal blood pressure when you are being measured.
- One-button Operation
- Extra Large Cuff
- Coded (GREEN/YELLOW/RED) Display
- 2 Users, 99 Memory Records Each
- Recharging Power Supply Mode
- 5 inch Large LCD Screen
Specification:
- Measurement range and accuracy: 0 ~ 299 mmHg, +-3 mmHg.
- Pulse range and accuracy: 40 ~ 180 times/min
- Rated voltage: output USB 5V interface.
- Dimensions: 5.5*3.9*1.3 inch
- Cuff Range: 22-44cm(8.7-17.3in)
 |
 |
 |
| One-Button Operation
One-Button start key makes the BP machine easier to use. Simply strap the cuff around your upper arm and press the start button to begin the process. |
Highly Accurate with Upper Arm Measurement
Easy-to-use Upper Arm BP Monitor with high accuracy. Date and time setup is available for better tracking. |
Soft Backlight Display
This fully automatic blood pressure monitor is built-in soft 3-color back-light, is clearly visible even in the dark and no harm to the eyes.The automatic wrist blood pressure monitor will turn off 30 seconds after use. This saves more battery power and increases the number of measurements. |
 |
 |
 |
| 2 Users Mode with 198 Memory
The BP monitor has double user mode, 198 memory storage with an average reading displayed of last 3 readings when recalling the stored data. Helps users to easily track their heal
|
Error Check Indicator
If error message comes on the screen, please match following messages to find the problem and correct error. Error 1:The sensor is abnormal, short the two pins of the sensor. Error 2:Pulse cannot be detected. Error 3: Air leakage is detected in the early stage of decompression, pull out the cuff, press on/key to measure, it will stop and display midway. Error 4: The trachea is blocked in the early stage of pressurization. Error 5: The interference is too large during the measurement, and the arm is moved during the measurement. Error 6: The pressure value exceeds 295mmHg (resistance type) (39.3Kpa)/300mmHg (capacitive type) (40Kpa) SOLOTION: Correct the measurement posture and re-measure |
3.5 Inch Large LED Display
This upper arm blood pressure monitor is designed with a large 3.5 inch LED screen. The 3-line display shows all the readings (systolic, diastolic and pulse and heartbeat) simultaneously. |
 |
 |
 |
|
| Step 1:
Wrap the cuff around upper left arm |
Step 2:
Put 2 fingers between the cuff and arm to check if can fit |
Step 3:
Make sure the cuff lies above 2-3 mm above your elbow |
Step 4:
Sitting Calmly for 5 mins before measurement. Sitting straight and place your arm on the table with your palms up. Keep the cuff and heart at the same level. Then press the start button |
